fbpx

Chillers/Heaters

H100 Circulating Heater

Starting at $989.99

The Ai H100 series heated recirculators offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while the 2nd generation PID controller gives you the ideal solution when you need precise temperature control.

This unit is perfectly paired with either the Minifecta or the Trifecta systems. For ultra high performance two of these units can be paired with the Trifecta extended collection vessel system for dual zone temperature control.

Specs

 Temperature range  Ambient to 100°C (No load)
 Electrical requirements
 110V 60Hz 1-Phase 1,050 watts
 Heating capacity  1,000 watts
 Recirculating pump  Pumping speed: 20 liters per minute, adjustable
 Maximum head: 16 feet or 5 meters
 Reservoir
 Dimensions: 9.5 x 12 x 7.5" (WxDxH)
 Material: Type 304 stainless steel
 Capacity: 15 liters or 4 gallons
 Chilling fluid connection: 3/8" hose barb x 2
 Chilling fluid drain port: 3/8" hose barb with on/off valve
 Temperature controller  Type: Digital microprocessor PID controlled
 Display: 7" touch screen
 Display unit: Celsius °C
 Temperature step: 0.1°C
 Temperature accuracy: +/- 2°C
 Temperature range: Ambient to 100°C
 Unit/shipping weight  30 Lbs / 36 Lbs
 Warranty  One year
UL Listing  Available (+$200)

C30-17 Circulating Chiller

Starting at $5,689.99

Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

This unit is recommended for use with the Minifecta extraction system. Used primarily for chilling the Jacketed Pressure vessel to maintain lower pressures during the recovery process. In use this chiller generally maintains -20C to -10C during the recovery process when paired to the Minifecta. For colder cryo temps this can unit can be used with the Post Chiller.

Specs

 Temperature range  Ambient to -30°C (No load)
 Electrical requirements
 220V 60Hz 1-PH, 1200 watts (Not compatible with 50Hz power)
 Cooling capacity
 (Assuming working environment
  25°C/77°F)
 @ 32°F/0°C:          1,750W
 @ 14°F/-10°C:       1,100W
 @-4°F/-20°C:           700W
 @-22°F/-30°C:         300W
 Compressor  Make: Panasonic
 Power: 208-230V 60Hz 1-PH
 Number of compressor: one
 Refrigerant: R410A
 Recirculating pump  Type: Centrifugal
 Output: 100 watts
 Pumping speed: 20 L/min or 5.3 gallon/min
 Maximum head: 20 feet or 6 meter
 Maximum pressure: 5.8 psi

 Reservoir
 Material: Type 304 stainless steel, polished
 Chilling fluid connection: 3/8" hose barb x 2
 Capacity: 17 liters or 4.5 gallons

 Temperature controller

 Type: Digital microprocessor PID controlled
 Display unit: Celsius °C
 Temperature accuracy: +/- 2°C
 Temperature range: Ambient to -30°C

 Unit/shipping weight  175 Lbs / 235 Lbs
 Warranty  One year
 UL Listing  Available (+$500)
 Download  Product brochure

C30-30 Circulating Chiller

Starting at $6,989.00

Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

This unit is recommended for use with the Trifecta extraction system. Used primarily for chilling the Jacketed Pressure vessel to maintain lower pressures during the recovery process. In use this chiller generally maintains -20C to -10C during the recovery process when paired to the Trifecta. For colder cryo temps this can unit can be used with the Post Chiller.

Specs

 Temperature range  Ambient to -30°C (No load)
 Electrical requirements
 220V 60Hz 1-PH 9A, 1,990 watts (Not compatible with 50Hz power)
 Cooling capacity
 (Assuming working environment
  25°C/77°F)
 @ 32°F/0°C:          2,800W
 @ 14°F/-10°C:       1,800W
 @-4°F/-20°C:         1,000W
 @-22°F/-30°C:         500W
 Compressor  Make: Panasonic
 Power: 208-230V 60Hz 1-PH
 Number of compressor: one
 Refrigerant: R410A
 Recirculating pump  Type: Centrifugal
 Output: 100 watts
 Pumping speed: 20 L/min or 5.3 gallon/min
 Maximum head: 20 feet or 6 meter
 Maximum pressure: 5.8 psi

 Reservoir
 Material: Type 304 stainless steel, polished
 Chilling fluid connection: 3/8" hose barb x 2
 Capacity: 30 liters or 8 gallons
 Dimensions: 23 x 15 x 7" (WxDxH)

 Temperature controller

 Type: Digital microprocessor PID controlled
 Display unit: Celsius °C
 Temperature accuracy: +/- 2°C
 Temperature range: Ambient to -30°C

 Unit/shipping weight  220 Lbs / 280 Lbs
 Warranty  One year
 UL Listing  Available (+$1000)
 Download  Product brochure

C80-10

Starting at $19,499.99

Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

C80 or as we call it "The Beast". For cryo temp injections,

    this

is the unit. With over 2000W at -40C, this unit has no problem maintaining -40C or lower temperatures during the recovery process. This can be paired with either the Minifecta or Trifecta extraction systems. On the Trifecta, this unit works well with the standard C30 paired to the Post Chiller, and the C80 paired directly to the jacketed pressure vessel. This allows the C30 to take the brunt of the temperature change by cooling the recovered solvent before it hits the pressure vessel. This allows the C80 to focus 100% of it's efforts maintaining the cryo temps in the pressure vessel. With this configuration constant -40C or lower temps are easily sustainable.

Specs

 Working temperature range  -40°C to -75°C (unit is not designed to run at temperature hotter than -40°C)
 Electrical requirements
 220V 60Hz 1-PH 22A, 4750 watts
 Compressor  Make: KK
 Power: 208-230V 60Hz 1-Phase
 Number of compressor: two
 Refrigerant: R404A (2680g) and R23 (710g)
 Cooling capacity (assuming
 working environment is
 25°C or 77°F)
 @ -40°C:       2000W
 @ -50°C:       1500W
 @ -60°C:       1000W

 @ -75°C:       280W
 @ -78°C:       180W
 Reservoir
 Capacity: 10 liters or 2.6 gallons
 Dimensions: 17.5 x 7 x 8.5 inches (LxWxH)
 Material: Type 304 stainless steel
 Chilling fluid connection: 1/2" NPT
 Drain port: 3/8" barb

 Recirculating pump  Pump type: Centrifugal
 Model: 25PLBR30-10
 Pumping speed: 8 gallon/min or 30L/min
 Power: 280W
 Pressure: 1 bar
 Temperature controller  Digital microprocessor PID controlled
 Accuracy: +/- 2°C
 Display unit: Celsius
°C
 Unit/shipping weight  515 lbs / 615 lbs
 UL Listing  Available (+$1000)
 Download  Product brochure